How to replace the Hard Disk Drive for OMEN by HP 15-dc Series Gaming Laptop ** This video apply to all OMEN 15-dc Series (15-dc0000 to all started with 15-dc Gaming Laptop)
** If you're looking for the replacement part #, please visit HP partSurfer at and follow instruction to find P/N. Once you have the correct P/N, please Google or eBay to compare the best price before purchase.
*********************************************************************
BEFORE YOU BEGIN:
If the unit contains heated components, wait until the components have cooled off before proceeding.
- Put on your electrostatic discharge (ESD) wrist or shoe strap to avoid damaging any circuitry.
- Place an ESD mat on a suitably grounded surface, and then place the unit on the mat.
- Remove any devices from the unit being serviced, such as CD-ROMs, SD Memory Card ...etc.
- Power off the unit and any peripheral devices that are connected to it.
- Disconnect the power cord from the electrical outlet and then from the unit. When a unit is plugged into an AC power source, voltage is always applied to the unit. You must therefore disconnect the power cord from the power source before opening the unit.
- Disconnect all peripheral device cables from the unit.
*********************************************************************
TOOLS USED IN REMOVAL AND REPLACEMENT.
Ensure that you have the tools you need before you begin. These should include:
- Small, Phillips-head (P1 and P0) screwdriver
- Small, flat-bladed screwdriver or a flat-bladed alignment tool
- Tweezers
- Electrostatic discharge (ESD) wrist or shoe strap
- Smooth jaw, bent-tipped needle nose pliers (optional)
- Small, smooth-tipped needle nose pliers (optional)
- Flashlight (optional)
NOTE: If worn or damaged screwdriver tips are used, the small screw heads could become stripped.
*******************************************************************
DISASSEMBLY TIPS.
Ensure that you take the following precautions when disassembling a unit:
- Label each cable as you remove it, noting its position and routing. This will make replacing the cables much easier and will ensure that the cables are rerouted properly.
- Keep all screws with the component removed, if applicable. The screws used in each component can be of different thread sizes and lengths. Using the wrong screw in a component could damage the unit.
- If the unit contains light-sensitive components such as toner cartridges, store the component in its original packaging or in a dark location to avoid damage.
******************************************************************
As always, please subscribe for more awesome videos.
Thanks for watching!
0 Comments